Product thermal capacity : 1-20 t/h Working pressure : 0.7-2 Mpa Available fuel : Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc. Available industries : Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc. Introduction:
Oil Or Gas Condensing Boilers is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
Technical advantages Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
Alibaba.com offers 2,381 oil condensing boilers products. About 66% of these are boilers, 1% are refrigeration & heat exchange parts. A wide variety of oil condensing boilers options are available to you, such as natural circulation, once through, and fin tube.
Combi gas boilers are also very economical to operate. The models are designed to produce heat on demand (for hot water or to heat ones home). Their high efficiency means they are more environmentally friendly than many traditional heating systems. Besides, they are tankless, which means that there is no energy wasted. Cons of Gas Combi Boilers
Efficient Condensing Boilers avaiable in Oil, Propane or Natural Gas. Gas Condensing Boilers are the most common, but you should look at fuel cost before you determine which type of fuel to use. With the cost of Natural Gas - generall Natural Gas Condensing Boilers are the best way to go, followed by Propane Condensing Boilers and Oil
Gas/oil condensing boilers The importance of economical heating is greater than ever before as energy prices will continue to rise in the future. The HANSA units with their combination of sophisticated technology and design allow for very low consumption and are ready for the future.
2019-10-4·Gas condensing boilers A gas-fired condensing boiler is one of the most economical and clean ways to generate heat and can significantly reduce your monthly heating bills, as well as your environmental footprint.
2019-10-4·So what is a condensing boiler? In order to understand what a condensing boiler does, you need to first take a look at non-traditional boilers. Standard boilers burn gas or oil to heat up water. This reaction leaves water vapour and CO2 as by-products. In non-condensing boilers, these excess gases are normally released through the flue pipe.
They are the most popular method of home heating in rural areas. There are 2 fuel types available for oil boilers, kerosene and gas oil with the most popular being kerosene. Kerosene is the only fuel available for use with both indoor oil boilers and condensing oil boilers.
Gas condensing boiler / solar combination ROTEX GCU compact Apart from a solar thermal system, it can also be backed up for example by oil, gas and pellet boilers or wood burning stoves with back boilers. If you do not install a solar thermal system immediately, one can be
Weil-McLain offers a broad spectrum of high efficiency gas-fired, oil-fired and combination oil/gas boilers for commercial use. Whatever your needs --heating a restaurant, hotel, casino, or any other commercial or industrial facility--depend on Weil-McLain boilers to provide the solution that delivers cost savings, energy efficiency and system flexibility.
2019-4-8·Industrial condensing boilers with high efficiency (typically greater than 90% on the higher heating value) are much in demand in America. offers condensing boilers, especially burning natural gas, LPG, diesel oil, light oil, etc. Condensing boilers with flue gas condensing recycle device are usually of higher efficiency than a convention
Natural gas is an abundant, natural resource and is a very inexpensive source of energy. Gas boilers can operate to heat both your homes water and air in a single machine. With natural gas, there is no storage tank or reserve for fuel. Efficient models, such as condensing gas boilers, have an AFUE (annual fuel utilization efficiency) rating
2019-10-2·Condensing boilers are water heaters fueled by gas or oil. They achieve high efficiency (typically greater than 90% on the higher heating value) by condensing water vapour in the exhaust gases and so recovering its latent heat of vaporisation, which would otherwise have been wasted.This condensed vapour leaves the system in liquid form, via a drain.
This ensures that Grant Oil Boilers (condensing) remain reliable for the long term and will have very low running costs. Grant condensing oil boilers are easy to maintain. Grant engineering have factored into our condensing oil boilers easy access to the burner and internal serviceable parts for easy maintenance.
The successful WOLF condensing boiler FGB-28/35 has a new little sister with 24 kW! All 3 FGB sizes are available as system boilers and also as combi boilers with exceptionally fast integrated hot water generation. The light weight, easy installation and simple maintenance make the
Browse from our range of wall hung boilers and floor standing boilers. Youll find space saving designs for the most difficult to access plant rooms and outstanding performance levels that are compliant with legislation. Working in partnership, we help you find the best commercial boiler solution for your project.
Alternative Energy Ireland install Grant Engineering condensing gas oil boilers. These boilers have a great reputation and experience of boiler applications in Ireland. Grants have the highest efficiency oil boilers available in the Irish market and also have a full range of SEDBUK "A" rated condensing oil boilers.
Wall-mounted gas condensing boilers make up about 90% of the market share for new heating systems in the UK. If you are on the gas grid and in the market for a new heating system, then a good combi boiler is probably your best bet. If you have a large household and want to run multiple showers, you may want a gas system with tanks.
A ROTEX boiler is simple in design and maintenance, flexible in combination with renewable energy sources and outstanding in energy efficiency. ROTEX stands for advanced condensing technology for oil and gas. The boilers offers high heating and hot water comfort with low consumption costs.
2019-10-6·AERCO's MFC (Multi-Fuel Condensing) hydronic boiler is capable of firing with multiple fuels including natural gas, propane or #2 fuel oil. It features a proven 4-pass fire tube heat exchanger design for maximum heat transfer and efficiency and is designed for condensing application in any closed loop hydronic system.