Product thermal capacity : 1-20 t/h Working pressure : 0.7-2 Mpa Available fuel : Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc. Available industries : Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc. Introduction:
High Thermal Efficiency Steam Boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
Technical advantages Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
It has vertical and horizontal types. It is a kind of boiler which automatically and continuously produces high pressure and steam. It uses electricity as its energy and has no noise and pollution. Adopting high quality heating tube, the surface heat load is low, and the thermal efficiency is high.
Model WNS High Thermal efficiency oil and gas fired steam hot water boiler Product Application WNS type horizontal oil (gas) fired steam (hot water) boiler is a kind of (smoke)fire-tube boiler with three passes, wet back and micro-pressure firing.
High Thermal Efficiency 107% . Fangkuai boiler awarded grade a boiler manufacturing qualification.(grade a boiler manufacturing). Fangkuai boiler won the national title of high-tech enterprises.(the national high-tech enterprises). Fangkuai boiler for automatic PLC thread smoke pipe rolling mill of utility model patent.
high thermal efficiency wood pellet steam boiler 1. The brief introduction of high thermal efficiency wood pellet steam furnace : Proper design: the vertical pipe structure facilitates heating transfer and the heating efficiency meets the related national standard. The boiler furnace is designed to decrease the expansion force and enlarge the heated surface.
2017-6-23·- Hinged doors for easy inspection & maintenance of boiler Fuel firing options are; light oil, heavy oil, gas or dual fuel, and bio gas Units are also available in vertical designs. Hot oil Heater / Thermo oil boiler. Oil/Gas Fired Thermal Fluid Heaters. At high temperature, water and steam requires a corresponding high operating pressure.
Steam and high temperature hot water boilers 4 energy consumption Steam and high temperature hot water (HTHW) boilers are commonly used in industrial sectors and in some applications in public and commercial organisations. They are found in circumstances where there is a continual demand for steam or hot water, in a wide
Zhong Ding Boiler Co., Ltd. DZH Series Coal Fired Steam Boiler. Zhongding DZH Series coal fired steam boiler is single drum longitudinal type water and fire tube steam boiler, equipped with arched tube plate, thread smokestacks, solves the problem of the pot shell type boiler tube plate cracking, pan cone lower speed bulge, water-cooled wall tube explosion High thermal efficiency, sufficient power
2019-9-25·The energy efficiency of a conventional thermal power station is defined as salable energy produced as a percent of the heating value of the fuel consumed. A simple cycle gas turbine achieves energy conversion efficiencies from 20 to 35%. Typical coal-based power plants operating at steam pressures of 170 bar and 570 °C run at efficiency of 35 to 38 %, with state-of-the-art fossil fuel plants
2019-10-3·In a thermal power plant, the boiler feed pump (BFP) is one of the critical auxiliary machines that are equivalent to the heart Japans first boiler with a steam pressure of 16.6 MPa (at the inlet of the turbine) was fabricated in 1959. In 1967, Japans first taining high efficiency even in the middle-load area, go-ing mainstream
2019-9-17·In thermodynamics, the thermal efficiency is a dimensionless performance measure of a device that uses thermal energy, such as an internal combustion engine, a steam turbine or a steam engine, a boiler, furnace, or a refrigerator for example. For a heat engine, thermal efficiency is the fraction of the energy added by heat (primary energy) that is converted to net work output (secondary energy).
OAB ® and other MHI steam generators feature BoilerFree technology.One atmosphere steam generators do not have high pressure personnel training requirements.Pyrolysis technologies for municipal solid waste: A review where W is the water content of the feedstock to the reactor, %; therefore to reduce this part of energy, MSW components
As the leader in home heating equipment, U.S. Boiler Company manufactures several oil-fired boiler solutions, including the award-winning MPO-IQ 3-pass high efficiency oil boiler, and MegaSteam, the most efficient cast iron residential oil-fired steam boiler in the world.
I am thinking to convert oil fired boiler and electric hot water tank into gas-fired boiler and gas hot water tank? some plumbers told me to go with high efficiency gas boiler and other plumbers told me to go with standard gas boiler.Steam Engineering Tutorials Spirax SarcoSteam Engineering Tutorials.